Aluminum Extrusion page 2

Extrusion Needed For Awning Installations

Aluminum Extrusion suggested retail prices.

The awning hanger is the part that is attached to the home.  The awning panels fit into the hanger.  The hanger needs to be matched in size to the awning panels.

Hangers also come in a few different styles.  The J hanger is used with an a-rail.  This type of hanger pivots in the a-rail and is needed when attaching to the fascia board on many houses.  If the fascia board is set at an angle the hanger needs to pivot to match the slope of the awning.

 

aluminum c hanger extrusion
The G-rail and the KC hanger can both be attached to a flat surface.  The photo at right shows a C-hanger.  It is very similar to a G-rail.


 

DESCRIPTION FINISH PART NO. SIZE PRICE U/M
** Mill 8 24' 5.108 FT
3000 Gutter Mill 9 20'    
           
(Use With 6" Flat Pan, 2 1/4" W Pan Or White 90 24' 6.128 FT
3" W Pan) White 91 20'    
** Mill 10 20' 4" 3.053 FT
3000 Side Fascia Mill 11 24' 4"    
           
(Use With 3000 Gutter) White 92 20' 4" 3.683 FT
  White 93 24' 4"    
           
3000 Third Band Mill 16 24' 1.470 FT
           
(Use With 3000 Or 3500 Gutter & SF) White 96 24' 1.755 FT
           
**          
3000 J Hanger Mill 23 20' 3.158 FT
           
(Use With A-Rail & 3" W Pan) White 95 20' 3.810 FT
           
**          
3000 G-Rail Mill 26 20' 1.973 FT
           
(Use With 6" Flat Pan, 2 1/4" W Pan Or          
3" W Pan)          
**          
3000 KC Hanger Mill 20 20' 2.070 FT
           
(Use With 6" Flat Pan, 2 1/4" W Pan Or White 94 20' 2.670 FT
3" W Pan)          
           
3000 Gutter Splice Material Mill 32 10' 3.660 FT
3000 Gutter Splice Mill 472 12" 3.899 EA
(Use With 2253 & 3000 Gutter)          
           
**          
3500 Gutter Mill 4 24' 4.703 FT
    5 20'    
(Use With Any Pan)          
           

 

Aluminum Extrusion Page 1
Aluminum Extrusion Page 3

 

top of Aluminum Extension page 2