AGP Parts

by Pat
(illinois)

I need bottom track for a 24' round Johnny Weismueller pool. Any idea where I can find them?

Bottom Rails Needed

I was looking over the pool wall of this 15 X 25 foot above ground pool to try to determine the manufacturer and found IV92 stamped above the basket filter opening. Is this any help? I'm hoping to hear from you soon! Are the bottom rails essential to assembly? I'm getting desperate, as my wife will not be impressed at all if I can't do anything with this hole I've dug in the back-yard!

Thanks in advance,

Joe Arsenault

Vernon, B.C. Canada

Bottom Rail for 24x52 Pool

by Lisa
(nc)

Needing bottom rails for round 24'x52" abg pool 4 ft long 7/8 wide and 5/8 high.

A site visitor posted this note.

You can find bottom rails at poolsavers

ph.02 9756 1977

Cracking Top Seats and Caps

by Laura
(Sheridan)

I took down a pool two years ago and finally got it put together, but now after swimming in it some of the top seats and caps are cracked, any reason why, is there a problem with installation?

Hi Laura.

They are probably just showing signs of old age. Resin or plastic pool parts seem to do this a lot. The sun bakes them a little and they fall apart. It's probably time to start looking for replacements.

Tidewater Top Rail and Upright

by Don Heigert

I have a 15x30x48 oval Tidewater pool that was recently hit by a tree limb from 50 foot away! I am looking for a replacement top rail and upright. Also need a 4 ' section of coping for the liner. I can possibly straighten the pool wall.

Any advice as per replacement parts would be greatly appreciated.

Thanking you in advance,Don Heigert donmar@madisontelco.com

Help Identifying This Pool

by Marek
(Glendale CA)

Hello, I'm trying to find some replacement parts for a 24x12 above ground I acquired from a friend. Unfortunately I don't know the make of the pool and might need some help identifying it

Can you identify it from these photos? The pool has stickers on the caps between the top rails with the symbol in the first photo.

I need to get hold of a liner, possibly the bottom tracks or at least the bottom track joiner plates.

And a gasket set for the skimmer, return etc. If you could help it would be amazing as I'm trying to reinstall it in the next few weeks for the kids.

Pool Base Rail and Base Plates

by Brittany
(Arkansas)

I obtained a pool from my sister. She had the pool for approximately 15 years. When the pool was taken down the base rails and plates were rusted. We need to replace these parts but she is unsure of the make of the pool. The pool is 24 foot round and 48 inches high. Please look at the attached pictures. If the brand of pool can be identified we are intersted in purchasing the replacement parts for the pool.