Cornelius Pool Parts

by Paula
(Oklahoma)

We bought a 24' round Summit pool. I ordered two new resin caps that were cracked. The company is located out of Canada. We are installing the pool this Saturday, two days. I just realized all the plastic push fasteners (Christmas tree clips) are broke. I have checked the hardware stores and all they carry are the short black ones for autos. I need long about 1 3/8" white ones. Why wouldn't screws work?

Thanks, Paula

Hi Paula.

Screws would probably work just fine. Sometimes you just have to use what you can get your hands on.

Cornelius Solex Pool Parts

by Kathleen
(Chicago, IL)

Looking for the 3 piece caps. We need a few to replace broken ones. I can not seem to find anything on this manufacturer and when I go to their website, it appears to be in a loop so you can not contact them.

I've had luck going through their distributors

by: Jayson

Kathleen, Did you try the following dealers? Both of them are showing as distributors for Cornelius out in IL area.

Maranatha Pools / Perigen Pools & Supply Center 3533 Highway 162 Granite City 62040 618-876-6800

Aqua-Gon Inc. 1728 North Aurora Road Napierville 60563 630-355-5363

I know I was able to order the three piece caps for a Cornelius Mirada here in WNY through a distributor listed on their site.

Hope it helps. Jayson

Cornelius Pacifica Pool

by Terri
(Greer, South Carolina)

We have had our pool for about 9 years. We are needing to replace some of the resin rails and other top portions.

I read in some information that the resin portions have a lifetime warranty.

My main problem is that I don't know where to get them from. I can't find any information about where to get replacement parts. In my research, the name Trevi came up also.

I still have the receipt stating a Pacifica pool package, but the place where we bought the pool has gone out of business.

If anyone can help me, I would appreciate it.

Cornelius Pool Base Plates

by Jason luttrell
(Dallas, georgia)

I recently got an old 24" (round) AGP from my in-laws. The bottom rails were literally gone. The pool was purchased in 1986 from Recreational Warehouse in the Atlanta area.

I am having an extremely hard time finding the base plates and the bottom rail for this pool.

I was able to find the rail from Cornelius/Trevi Pools from Canada. However, I told the salesman that it was a 24' pool and he sent me 17 rails. I have 18 uprights and 18 top rails. My top rails are 49" long minus the joiner sections.

The rails that I got from Cornelius Pools are 55.5" long. This isn't a huge deal since I can simply cut them down to 49".

I still need the base plates though. My uprights have 3 screw hols. One on each side and one on the outer side.

I have no idea who made this pool but would really like to know. My mother-in-law is a meticulous records keeper and actually had ALL of the receipts from they bought the pool. The receipt shows it to be a 24' Majestic Pool.

Any ideas?

Please respond to tow2topgun@yahoo.com

Thank you in advance, Jason

Cornelius Pool Top Rails

by Carmine Dambra
(Pompton Plains N.J. USA)

I have a Cornelius pool and I am looking to replace the top rail. I am not sure which model I have. Can you help me?

Old Cornelious Aboveground Pool

by Kelly
(Windor, ON, Canada)

I have an old Cornelius aboveground swimming pool, and I don't know which model it is. I have pictures of the caps for the top rails/ledges but I can't seem to find anyone who knows what the model of pool it is. I need some parts for it. All I know is its an old one from the 90's. Can someone please help me!

Thank You

Summit Pool Caps

by Darlene
(Aldergrove BC CANADA)

We purchased a CORNELIUS pool - SUMMIT model 18' x 33' oval approx 15 yrs ago from IDEAL POOL in Surrey, B.C. Canada.

We have thoroughly enjoyed the pool and are very happy with it.

We now need to replace 10 of the MULTIFACETED RESIN CAPS but have been unable to locate the parts as we understand that the SUMMIT model is no longer manufactured.

On your website www.corneliuspools.com you show two above ground pools that look similar to the SUMMIT, the OLYMPIA and DYNASTYmodels.

Because our SUMMIT pool has 52 inch walls, 7" support posts and an 8" top ledge, which is the same as the OLYMPIA and DYNASTY models, I was wondering if the caps from the OLYMPIA and/or DYNASTY would match. In the SUMMIT brochure it reads: "The extra wide 7" support post and double wide resin cap maintains the overall Roman Column design ...... The Summit's multifaceted resin cap provides an integrated support system to both the ledge and post."

Please advise as to how we can go about ordering these parts and the price for each including shipping.

Your help is very much appreciated.

dkopfensteiner@hotmail.com

Cornelius Oval Pool Plates

by Megan
(Temple,Tx)

We recently got a Cornelius oval pool from a friend that no longer used it but I am desperately searching for the steel joiner plates that clip over the liner and the legs and uprights of it. I found them on the pool factory but they are crazy expensive and shipping is ridiculous. We live in Texas, is there anywhere around here that I can find these?

email is meganhswoda@gmail.com

Thanks!!

Conelius Pool Caps

by Katrina
(Ripley, Ohio)

I have an older pool and am looking for the replacement caps for it. The Cornelius caps will work. I need 14 of them.

Cornelius Brenton/Mirada/Solaris

by Mr. Chris Hager

I am looking for top caps, the one I need is the Cornelius Brenton/Mirada/Solaris 3 piece top cap straight oval side. I could use just the two pieces for the top rail itself without the collar piece but I’ll buy the two or three pieces but I need 12 of them. Can someone help me?

Cornelius Zephyr 21ft Caps

by Alita
(Waterford, NY)

I have been searching for the caps for a Cornelius Zephyr 21ft pool. I know the part number but can not locate replacement parts. Do you know where I can get replacements or generic parts for this pool?

Track connector plate 6RCK

by Melvin
(Eddy, Texas, USA )

I have a 27' Cornelius Dynasty pool and I need some connector plates for my top rail.
6RCK is the code.

Cornelius Dynasty Pool

by Teresa
(Rock Hill, SC)

I have a Cornelius Dynasty Pool 24x52 Saltwater that I'm in dire need for some top plates.
The wind blew the cover off and with it some of the top rails that broke the plates into.
I have searched everywhere.
Thanks so much!

Cornelius Dynasty

by Jamie
(Texas)

I'm needing top tracks part number 6101-00 for my Cornelius Dynasty pool and top track connectors.

Cornelius Dynasty Bottom connector plate

by Andie
(Oklahoma)

I bought a used pool and when going to put it together we realized numerous track plates were broken. I am in need of 10 bottom track connector plates. Anyone know where I can find and purchase them?
The item number is 6RCK

Cornelius Bottom Plate

by Dale
(Louisiana)

I'm looking for a base plate or foot for a 18'cornelius millennium.

Cornelius Paradise Pool Parts

by Beverly bailey
(Columbia SC usa)

I am looking for Cornelius paradise 30 foot round pool top caps and boot.

27' Cornelius Solex AG Top Rails and Caps

by Timothy Cavanaugh
(Polo, IL)

Can anyone help me find top rails and caps for my 27' Cornelius Solex AG pool? Please email me at tcav1169 @ gmail.com Thanks, Tim

Looking for Top Caps and Supports

by Darrell Clevett
(Kamloops BC Canada )

Looking for top caps and supports also top rail or ledge.

For a Cornelius 12 x24 oval pool
Straight top ledge are 32”
Curved are 45 “