by Brenda Weller
(Summerfield, Fl.)
I am missing two bottom plates for the uprights. Do you know if I can purchase these anywhere?
I would also like to replace the plastic safety caps (two-piece). I am not sure what kind of pool it is. I think it looks like an old Reprieve pool.
Hi Brenda.
Read through the links below, they should help you with all the different ways of finding used above ground pool parts.
On the first two pages there is a link to a parts store that might be of help. It's called the Asahi parts store. Your local pool stores might be of help and it is also possible to have parts made at a sheet metal shop.
The bottom plates are the easiest pieces to either have made or adapt a similar one. They do not have to be an exact match.
Hope you find your pool parts.
by Matt
(Central PA)
Above Ground Pool Bottom Plate
I was just given a pool, and a section of the base corroded. I'm going to need 2 pieces of wall channel, and a wall adapter. Can anyone identify for certain the pool based on this plate? Thanks in advance.
Hi Matt.
I can't say for sure what it is but maybe someone else can.
EZ Lock screw in part
Hello could you please help me locate the EZ lock screw in lock part that secures my rail system to my above ground swimming pool? Each rail is secured together with an over lap joint system at each standing post and the part in question "EZ lock screw" is screwed into position at each of these post locations thus securing the rail system in place. My 27' above ground pool mfg. DISCOVERY and the model is the Serra purchased back in 2002.
I have enclosed two pictures of the part in question and would welcome any help you could offer.
Ricky
by Rick Rutherford
I own a 18 x 33 Adobe above ground pool. I would like to find the top rails for the pool. I believe they are aluminum and the end has long pieces with the sides having the shorter ones. The manufacture is either Sparco or Seaspray, I have both listed as manufacturer on my paperwork. Thank you.
by Van Wilkin
(Mcfarland, WI)
rail cap
I am looking for top rail caps. I don't know the brand of pool or cap. The part number stamped on the bottom is 13637
by Chelsea Tolman
(Sophia, NC USA)
Pool Foot Plate
Our pool's foot plates measure 6.5" x 3.5" and the space between the leg tabs is about 5".
Do you guys carry replacement pieces that may fit my pool? This pool was on the property when I bought the house so I have no idea what brand it is.