by Colleen
(Middletown, Mo )
Where can I find replacement bottom rails for pool wall and base plate for an outback pool brand?
Hi Colleen.
I don't have a source for Outback pool parts but most stores that sell these pools should be able to order replacement parts. This form does have a comments section and maybe someone will be nice enough to post a link to a place where replacement part can be ordered.
Below are the pages I have where some above ground pool parts can be ordered and you may be able to find parts that are close enough in size to work OK for you.
Comments for Outback Pool Replacement Parts
|
||
|
||
|
||
by Beth Broxton
I need a replacement skimmer basket for an above ground outback pool. The cover of the basket says outback. Dimensions: 7 1/2" wide at top, 6 1/2" wide at base. 6 1/2" tall. Can you tell me where to get this? Thanks, Beth Broxton
Hi Beth.
I will look into this for you. If anyone else knows, please us the comments button.
Comments for Outback Skimmer Basket
|
||
|
||
|
||
|
||
by Vickie
(Jefferson City, MO)
We have a 12 years old Outback Melbourne above ground 15x30/52" pool with a deck all the way around it. The top rails are above the deck about 1/2" which gives the appearance of an in ground pool.
We are looking for the plastic connectors for the top rails. We have had no luck. We replaced the top rails with 7" steel rails but the connectors they sent are for an installation with exposed support posts and will not work with our set up.
The original connectors are too small now. they were simple plastic the clipped over the front and over the back without any screws or fasteners.
We need 21 of them? any options
by Ann
(Kentucky)
I received a 27 foot Jubilee 10yr.old pool from friends. I took it apart myself so I have all parts but need to replace the tracking and maybe foot or base plates. I have a local pool store searching parts for me but haven't heard from then yet. Its been over a week and I'm getting worried. The pool was bought from an Outback dealership store that has gone out of business. Top plates are different shape so can't us those. Please tell me I didn't get my family all excited about having a pool this summer just to find out its not going to happen. Thanks Ann
by Wendell Holmes
(Riverton, Illinois)
Sirs, Two years ago we purchased an Outback above ground swimming pool, 24 foot x 52 inch wall, the Brisbane Model. Over the winter one of the plastic end caps that hold down the top rail has cracked and is coming of and in need of replacement. It has Atlantic in an oval on it. Where might I be able to find one of these so that I can repair/replace this on our pool? Please reply if you would. Thanks for your help, Wendell Holmes Email: fllngstrsddlry@aol.com
I am looking for the top support caps for a Outback Melbourne pool bought in 2005.
by Carol
(Masury, Ohio)
I have been all over the internet looking for bottom rails for a Outback Silverado 18 foot pool I recently purchased used. Also need a side post. Any help would be greatly appreciated on finding information. I can't find any solid info on Outback. Thanks!
by Dana
(cherryville nc)
Looking for replacement top caps for Outback 18 ft above ground pool. Set of 12
by Bill Shehand
(Pittsburgh, Pa)
2008 Outback pool
I need Post Caps for my 2008 Outback pool. The model of the post caps is Brisbane. Is there any chance you have them to sell? Thank you!
by Bernard
(Ireland (formerly Brick, NJ) )
18x33 buttress-free above ground pool. Late 1990s / early 2000s model, purchased 2001 from Kinney Pools in NJ. Model might be a Century Gibraltar? I have seen some reference online to Atlantic brand? The plastic top caps are branded as Outback.
Anyone know if bottom tracks are interchangeable with other models of the same size? I have no part numbers.
Thanks.